'69 Cutlass S Emblem Measurements, Drillbit Sizes, Exact Locations
 

Hey everyone! Hoping for some very specific Cutlass info help...

Restoring a '69 Cutlass that was half singed in a garage fire from previous owner. Probem is the emblems weren't on the original (and the previous owner filled most of the holes with the previous bodywork/paint job) and the ordered ones won't be coming in before I have the allotted time to strip/prep & prime/paint the car. Need to drill during the paint stripping and bondo-ing phase!

Does anyone know the emblem spacing measurements, exact location, and drillbit sizes for all emblems as they originally were on a '69 Cutlass S??
(Including tongue emblem, both Cutlass S front fender emblems, trunk Cutlass emblem, the back side fender emblems, etc.)

I would greatly appreciate this info if anyone knows, as I worry drilling after the paint job will ruin it. Or if anyone has any pointers for doing these steps after painting.

Set to strip it down and do the drilling hopefully in 4 or 5 days!! 23rd or 24th of March!

Thanks so much for any insight or tips!

And hello! I am new here :)

Laurel