< src="http://www.google-analytics.com/urchin.js" =text/>
</>
I hope someone can help, 1994 Olds Cutlass Supreme 4 door. The problem I am having is, all the doors are unlocked, but from the out side I can't open either the drivers side or the passenger side front. But I can open both the rear doors no problem. This is my wifes car, and she is not a happy camper.[img]smileys/smiley7.gif[/img]This has me stumped.

< src="http://www.google-analytics.com/urchin.js" =text/>
</>

< =text/>
_uacct = "UA-939292-46";
urchinTracker();
</>



So how are you getting in the car now?





I would try cleaning all the grounds accross the radaitor support, should be about 5 places.

< src="http://www.google-analytics.com/urchin.js" =text/>
</>
did this problem suddenly appear or gradually? are the indicators inside the door showing unlocked? is it power door locks? i also agree with checking the grounds.
< =text/>
_uacct = "UA-939292-46";
urchinTracker();
</>

< src="http://www.google-analytics.com/urchin.js" =text/>
</>
Powerlocks. I went through the trunk, luckily one of the folding back cushions was not latched. The lockindicators are all up, I pushed them up manually. I tried unhooking the battery in hopes that maybe something electrically was happening. To no avail. And yes it happened suddenly, no warning whatsoever. So when I shut all the doors the only ones that will open from the outside are the rear. I searched most of the night on the internet but couldn't find anything. I'll try searching for and cleaning the grounds.





Thanks
< =text/>
_uacct = "UA-939292-46";
urchinTracker();
</>

&lt; src="http://www.google-analytics.com/urchin.js" =text/&gt;





</>try this. Also check fuses, maybe circut brakers, what else dont work thatelectrical?


http://www.roddingroundtable.com/for...pic.php?t=8119





&lt; =text/&gt; _uacct = "UA-939292-46"; urchinTracker(); </>
< src="http://www.google-analytics.com/urchin.js" =text/>
</>

< =text/>
_uacct = "UA-939292-46";
urchinTracker();
</>Edited by: Ryano

< src="http://www.google-analytics.com/urchin.js" =text/>
</>
Everything else seems to be working at the moment.