need a lot of info on 350 olds
Hi I am working on a 77 Cuttlass with 56341 miles on it
was sitting for 3or4 years . Put hot battery she fire right up. What I need to know if anybody has build a good street motor out of 350 with windowed main weds . Mechaic said not to mass with that motor get chevy 350 and drop it in. Trying to keep her all OLDSMOBILE thanks rdupont |
It all depends on how crazy you want to get. There are guys running 400 HP 403's with no issues.
If you want to go absolutly nuts you can always get a girdle if you need to keep the original engine. If originality is not an issue then you could find a 455 and tell him to stuff his SBC. 455's are a lot of fun on the street with little work. You will have so much torque that you won't know what to do with yourself. |
You can get an easy 375-400 hp out of your olds 350 with the right parts, but you should put a girdle on the bottom end. Edelbrock heads, Lunati Bracket master cam, Edelbrock performer rpm manifold, 1 3/4 inch headers and a holley 750, among other things will get you around 400hp. You should visit mondellotwister.com for all the information you would ever need. I would never put a chevy motor in my cutlass. if you want to have a lot of fun, power, and versability drop the 455 in and go to town on it.
|
Yes. Getting to the 400Hp range is relatively easy. The real trick is getting above that without power adder like nitrous or a blower.
|
All times are GMT -5. The time now is 05:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands