Oldsmobile  Forum - Oldsmobile Enthusiasts Forums

Oldsmobile Forum - Oldsmobile Enthusiasts Forums (https://oldsmobileforum.com/forum/)
-   Intrigue (https://oldsmobileforum.com/forum/intrigue-24/)
-   -   power windows (https://oldsmobileforum.com/forum/intrigue-24/power-windows-918/)

muckmyer 01-25-2007 10:42 PM

The power windows on my 01 Intrigue quit working (with my window down) I checked the fuse and it was good. Any ideas?

hankjoey 02-24-2007 03:56 PM

Hope someone replies to your problem. Our 1998 Olds Intrigue has a similar problem:the power window on the passenger side will not lower. A problem that we can live with, but annoying.

art178st 03-02-2007 12:25 AM

have you tried takin a look at the window motor

hankjoey 03-02-2007 12:44 PM



No I haven't. Don't know how to get to it.



art178st 03-03-2007 03:08 AM

im not suggesting you try fixin it yourself. unless you have expirience with cars but yeah it should be under the door panel. I mean i have a similar problem with my drivers side window but it works but it's just weak and sometimes just gets stuck and then i'd have to press the button and pull it myself (its a pain). Soon i will be takin my car to the dealer to get fixed.

hankjoey 03-03-2007 05:08 PM



Thanks for the suggestion. May try that come spring.


If you take it to the dealer please post general expense of doing this through the dealer. If I can't manage it myself would be helpful to knowin general what ($ cost) to expect.


Thanks.

lunasea808 03-04-2007 03:48 AM


Sorry for the double post.

Edited by: lunasea808

lunasea808 03-04-2007 03:58 AM



It's not hard to do. All you have to do is get to the window regulator and motor. You can start by following this (removing the door panel)

http://members.localnet.com/~jester8...FrontDoorPanel /stereoremovalOldsmobileIntrigue98_01FSpk.php.htm
Just copy and paste</span>

Edited by: lunasea808

hankjoey 03-04-2007 05:46 PM

When the weather warms up I'll try that -- especially if it's not too hard to get that door panel off. Thanks

lunasea808 03-05-2007 03:45 AM

Yea it's not hard it's only three bolts that hold the regulator and two for the motor. I think it's a 8 or 10mm deep socket. Also make sure you support the window itself before pulling the bolts off.


All times are GMT -5. The time now is 07:31 AM.


© 2024 MH Sub I, LLC dba Internet Brands