Hello! My wife and I just purchased a 98 Intrigue, and the passenger turn signal does not work. It makes a fast clicking sound, and the front bulbs do light up, but don't flash. The back one doesn't do anything.

The hazard (four-way) lights all work, so I think I can eliminate the problem being with a bulb.

I have replaced the bulbs in the front and back, and have also tried another bulb harness in the front, but it hasn't helped at all. I also checked the fuses next to the glove box, and they look okay.

Where do I go from here? I read about grounding it, but it isn't a problem will bulbs going bad. (and there is a grounding wire on the other (driver) side)

Thanks in advance... it is driving me crazy!
< src="http://www.google-analytics.com/urchin.js" ="text/"></>< ="text/">_uacct = "UA-939292-46";
urchinTracker();
</>

 

&lt; src="http://www.google-analytics.com/urchin.js" =text/&gt; </>This is my first post. I have a 99 intrigue and have the same problem from time to time. I also have a new Vette with the same problem. Seems it common with GM vehicles.Usually its not the bulb but poor contact in the socket. Clean the socket best you can and sand the inside contacts. Purchase some dialectric silicone(any auto store) and load up the socket before putting in new bulb. Let me know if it works.


Al &lt; =text/&gt; _uacct = "UA-939292-46"; urchinTracker(); </>
< src="http://www.google-analytics.com/urchin.js" =text/>
</>

< =text/>
_uacct = "UA-939292-46";
urchinTracker();
</>Edited by: c6vette