2003 Alero that originally had 6 ABS codes: C1221, C1225, C1226, C1232, C1298, C1247. After replacing both hubs and the driver's side ABS wiring harness I still have the three dash lights on and a C1232 code which indicates a shorted left front ABS circuit. There are other codes but I'm 90 percent sure they are unrelated and will start another thread on them. Today I pulled the harness plug off the ABS module pump and checked continuity to the wheel sensor plugs which are fine. The new hubs both show around 1100 ohms all the way to the main harness connector. All info I can find on the internet says that what I did should fix the C1232 code. Is it time to replace the ABS module? I found where many have re-soldered the connections on the board but they were all GM trucks and not once have I seen this code being fixed that way. Any other ideas?