< =>
<!--
var SymRealOnLoad;
var SymReal;

Sym()
{
window.open = SymWinOpen;
if(SymReal != null)
SymReal();
}

SymOnLoad()
{
if(SymRealOnLoad != null)
SymRealOnLoad();
window.open = SymRealWinOpen;
SymReal = window.;
window. = Sym;
}

SymRealOnLoad = window.onload;
window.onload = SymOnLoad;

//-->
</>
ok on the 94 supreme when they went to start it (family members car) there was no pressure in the fuel rails and no noise in the tank so i suspected the fuel pump and after voltmetering the fuses and checking everything i found out the fuel pump wasent working but was getting power.


so i got a new one and put it in and nothing still. good thing i didnt put the tank up before i tested it.


anyways im getting just under 6volts with a volt meter testing it. is that normal because i always figured 12 volts for all pumps?


and if not why is it getting olny under 6 volts?


its a 94 with a 3100 engine in it and pump in the tank.


under the hood is the fuel pump fuse panel and there is a relay looking thing in there for the pump. is that whats bad or something else?


the kit came with replacement wires which i changed because they looked dirty and used badly.


any help would be great

 

< =>
<!--
var SymRealOnLoad;
var SymReal;

Sym()
{
window.open = SymWinOpen;
if(SymReal != null)
SymReal();
}

SymOnLoad()
{
if(SymRealOnLoad != null)
SymRealOnLoad();
window.open = SymRealWinOpen;
SymReal = window.;
window. = Sym;
}

SymRealOnLoad = window.onload;
window.onload = SymOnLoad;

//-->
</>
also learned something else... checked the relay and the fuse panel for proper volts and its getting just under 6 volts with the volt meter and the pump requires 12 volts to run as i learned.


for some reason the car isnt getting 12 volts up front or in the back for the pump... i looked around but dont know where the grounds and all are that i would need to find to check for problems, might be the brain box as i figured also.


not to mention i checked the igintion wires and all the wires in the steering column for proper volts and they are all getting proper readings..


i need a hanes manual or something with wiring diagram for the car.