'94 ciera with a 3.1 Seems to be a bit hot under stress, so I
want to change the stat. But the whole mess is under the intake.
Any hints on how to do this painless?

 

THE EASIEST WAY IS TO REMOVE THE THROTTLE BODY / ITS ONLY


A FEW BOLT AND YOU CAN GET THE GASKET AT AZ/CHECKER/NAPA


ETC , ITS STILL A TIGHT FIT BETWEEN HOUSING AND EXHAUST PIPE


BUT CAN BE DONE , WHILE OUT SEE IF DISTRIBUTOR DRIVE SEAL IS


LEAKING IF SO THATS THE TIME TO REPLACE IT