General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here...

Advice required for vacuum control

Thread Tools
 
Search this Thread
 
  #1  
Old 04-06-2008, 02:17 AM
ozzy66toro's Avatar
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Australia
Posts: 2
Default




< src="http://www.google-analytics.com/urchin.js" =text/>
</>
Hi guys,


Im about to start restoring my 66 Olds Toronado but since there arent many here in Oz im finding it hard to get advice, parts etc.


One issue Im having is the vacuum controlled headlights, central locking etc.


The lights only go up and down Intermittently and occasionally one light stays up and you have to give it a slight tap for it to go down.


Also when I press the central locking button inside the car all you hear is the sound of air and nothing happens.


What exactly controls all this? Is there a rebuilt kit of some sort available or an alternate way of powering things?


Any info or dvice will be greatly appreciated


Thanks
< =text/>
_uacct = "UA-939292-46";
urchinTracker();
</>
 
  #2  
Old 10-01-2008, 01:49 PM
425superrocet's Avatar
Junior Member
Join Date: Oct 2008
Location: Norway
Posts: 4
Default

hi i have the same car and have had simular problems. the headlight are operated by a vacum sylinder located in the forward corners of the engine bay,and these need some lubricant once in a while.and also check all the vacum hoses running from the sylinders and into the vacum tank in the left forward corner in the engine bay the ligts are getting vacum from the intake manifold the hose is conected behind the carburetor and it is very typical that these old hoses can crak open in the ends where they are conected.i belive this is the cause for your central locking problem to.just follow the hissing noise,and you will brobably find a lose craked vacum hose.good luck![img]smileys/smiley16.gif[/img]
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
valdez420
General Tech Help
0
02-26-2011 05:51 PM
delta_schmelta
General Tech Help
0
06-13-2010 01:31 AM
91Calais
Cutlass
0
03-21-2010 10:16 AM
68oldsrocket350
Cutlass
1
12-18-2006 07:15 PM



Quick Reply: Advice required for vacuum control



All times are GMT -5. The time now is 07:38 PM.