alero keyless entry remote reprogramming
#2
I have a 95 cutlass that programmed by turning on the ignition and while pressing on the remote touching a wire from the power antenna plug to a grounding out on the body of the car. My car had a wire with a male plug end just hanging and I attached a wire to it and then grounded it out on the body of the car. Hope this helps and let me know. C.W.
#4
Most remotes can be programmed manually at home without any tools or technical skills.
If you need to just order the instructions please check our website at
http://www.carandtruckremotes.com/pr...tructions.html
If you have any more questions or have any specific inquiries about programming your vehicle please contact us at customercare@carandtruckremotes.com including year, make and model of your vehicle.
You can also view our FAQ page for answers to common questions. Link below
http://www.carandtruckremotes.com/faq.html
Best Regards
Customer Care
http://www.carandtruckremotes.com
http://www.newkeylessremotes.com
http://www.keylessentrystore.com
If you need to just order the instructions please check our website at
http://www.carandtruckremotes.com/pr...tructions.html
If you have any more questions or have any specific inquiries about programming your vehicle please contact us at customercare@carandtruckremotes.com including year, make and model of your vehicle.
You can also view our FAQ page for answers to common questions. Link below
http://www.carandtruckremotes.com/faq.html
Best Regards
Customer Care
http://www.carandtruckremotes.com
http://www.newkeylessremotes.com
http://www.keylessentrystore.com
#5
Thread
Thread Starter
Forum
Replies
Last Post