Silhouette Talk about the Oldsmobile Silhouette within...

Silhouette stumbles

Thread Tools
 
Search this Thread
 
  #1  
Old 07-12-2008, 08:35 AM
kd6mrf's Avatar
Junior Member
Thread Starter
Join Date: Jul 2008
Location: United States
Posts: 3
Default



95 Silhouette 3.8 v6 engine cuts out intermitently on slight left hand turn and between gear shifts. If I let up on the gas pedel slightly and then back down on it it seems to help. I have replaced the throttle sensor. It''s worse in hot weather.


Dealer said I have to wait till somthing goes out.


Have changed all the sensors, plugs and wires, coils, computers, fuel filter, fuel pressure regulator, injectors, and the compression is 150 on all cylindars.


Thanks for any help in advance.


Jack


 
  #2  
Old 07-25-2008, 08:04 PM
kd6mrf's Avatar
Junior Member
Thread Starter
Join Date: Jul 2008
Location: United States
Posts: 3
Default



I just found a bad connection. Haven''t had time to repair yet. Pull or wiggle the wires on the engine side of the PCM pass thru harnessplug"All Data c111". Do this when the engine compartment is hot. It turned the engine off. Must be a broken wire.[img]smileys/smiley1.gif[/img]


Jack
 
  #3  
Old 08-02-2008, 10:51 AM
kd6mrf's Avatar
Junior Member
Thread Starter
Join Date: Jul 2008
Location: United States
Posts: 3
Default



Found the problem. Removed the pass through plug C111 at the wire harnes on the firewall. Hard wired the passthrough to engine harnes.


runs good now.





jack
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CrappyAleroGLS
Alero
12
11-03-2009 06:09 PM



Quick Reply: Silhouette stumbles



All times are GMT -5. The time now is 04:18 AM.