Intrigue Talk about the Oldsmobile Intrigue within...

Service Engine Soon Light

Thread Tools
 
Search this Thread
 
  #1  
Old 01-19-2006 | 12:27 AM
IRONDOG442's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2006
Posts: 5
From: United States
Default

Hey fellow Olds lovers got an issue with my 99' GLS Intrigue with 94,500 miles on it and a 3.5 liter shortstar six. The car runs great untill it gets to the first line on the temp. gauge then starts to misfire and or stall if I am a red light or stop sign and operating at low RPMs. Once it warms upand gets to normal operating temp.it runs fine with no miss at all. Have replaced coil packs inlcuding ignition modules and a crank shaft positioning sensor (which is what the car's codes came up as). I suspect maybe the A.I.R. regulators on the exhaust manifoldsthrowing up false codes, but havent checked them with a Mighty Vac yet to see if the diaphrams are bad. Before I do this any ideas or similar issues?? Edited by: IRONDOG442
 
  #2  
Old 01-19-2006 | 02:29 AM
texasred's Avatar
Super Moderator
Joined: Aug 2005
Posts: 282
From: United States
Default



Take it to Auto Zone. They have the scanners that will read your fault codes and clear them. And they'll do itfor free.


And a suggestion on that...have them clear the codes and see if that fixes it before you start dumping money into it.


C.J.
 
  #3  
Old 01-19-2006 | 11:01 AM
IRONDOG442's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2006
Posts: 5
From: United States
Default



Tex,





Thanks for the advice but Autozone's code reader is how I have been diagnosing the problem from the start. I could use an analyzer to determine the exact problem but that can get as expensive as replacing some of the suspect parts. Any other suggestions??
 
  #4  
Old 01-19-2006 | 10:10 PM
texasred's Avatar
Super Moderator
Joined: Aug 2005
Posts: 282
From: United States
Default



Did you have them clear the faults each time, drive it for a while, and rescan?


C.J.
 
  #5  
Old 01-19-2006 | 11:22 PM
IRONDOG442's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2006
Posts: 5
From: United States
Default

Yes and the light still comes on reading CKP
 
  #6  
Old 01-20-2006 | 12:47 AM
texasred's Avatar
Super Moderator
Joined: Aug 2005
Posts: 282
From: United States
Default



Do you have a Chassis Service Manual?


C.J.
 
  #7  
Old 01-21-2006 | 02:21 PM
IRONDOG442's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2006
Posts: 5
From: United States
Default



No I do not.





 
  #8  
Old 01-21-2006 | 11:08 PM
texasred's Avatar
Super Moderator
Joined: Aug 2005
Posts: 282
From: United States
Default



Check ebay and pick one up. It'll have advance code troubleshooting in it. They are worth their weight in gold.


C.J.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Angie
General Tech Help
4
09-02-2010 10:17 AM
xeroxed
General Tech Help
1
02-15-2009 11:14 PM
Jimmie12
New Member Area
2
09-18-2008 03:22 PM
tkruger
General Tech Help
0
11-04-2007 09:47 PM




All times are GMT -5. The time now is 08:51 AM.